PrintaGlue - Glue for 3D printed parts 10g
7.50 €
Tax excluded
Not Rated
PrintaGlue - 10g
Repair or connect 3D printed parts.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
PrintaGlue is a universal superglue that has been chosen to work with a wide variety of 3D printing materials.
It combines strength, quality, and durability.
It is always a help to have Super Glue in next to your 3D printer, as you never know when you will need a quick fix.
PrintaGlue comes in easily portable 10 gram bottles, which are perfectly sized for convenient storage to make quick on-the-go repairs.
Application:
Apply the adhesive sparingly to one surface. Press together immediately.
Hold in place for 15 to 30seconds until bond sets.
PrintaGlue has been tested with the following materials.
BOND
(+++) strong
(++) medium
(+) weak
Hazard and precautionary statements
Warning: Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/doctor/if you feel unwell. Specific treatment (see instructions on this label).
PRNTGLE10
PrintaGlue has been tested with the following materials.
| PLA | PET-G | M-ABS | WOOD PET-G CF20 | PC | PC-ABS |
PA12 | FLEX HARD | |
| PLA | PET-G | M-ABS | WOOD PET-G CF20 | PC | PC-ABS |
strong bond | medium bond |
| PA12 | FLEX HARD | medium bond | weak bond |
You might also like
Customers who bought this product also bought:
- Reduced price
PrintaGlue - 10g
Repair or connect 3D printed parts.
No customer reviews for the moment.