BASF Ultracur3D® Color Kit | 500g

70.00 €
Tax excluded
Not Rated
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA
Color
In stock

 

Intended Use

Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for post-processing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing.

 

Available color

  • Ultracur3D® CK 01 (White)
  • Ultracur3D® CK 02 (Yellow)
  • Ultracur3D® CK 03 (Cyan)
  • Ultracur3D® CK 04 (Magenta)
  • Ultracur3D® CK 06 (Black)

 

Mixing method

1) Shake the color kits well before use. Pigment dispersions will often show some settling over time.

2) Determine the amount of color kit you want to add.

3) Mix the clear resin with the color kit:

  • Option 1: using an external mixer, just mix until the mixture looks homogenous (15-30 minutes). Since materials will be exposed to light, it is recommended to do this in a UV-free (orange light) room.
  • Option 2: Add the required amount of Color kit to your base resin in its original container (bottle) and shake until homogenous.

4) Determine appropriate printing parameters and start printing!

 

Compatibility with other Ultracur3D® 3D-printing resin

The Ultracur3D® CK Line has shown good compatibility with both rigid Ultracur3D® materials (ST-line, RG-line) as well as flexible Ultracur3D® materials (FL / EL – Line).

300118

Write your review

No customer reviews for the moment.

You might also like