XSTRAND™ GF30-PP (Polypropylene + Glass Fiber)

60.00 €

Not Rated

Add Review

XSTRAND™ GF30-PP
Polypropylene + Glass Fiber

Diameter: 1.75/2.85 mm
Weight: 500 g

prodotto presente su

Weight

500 g

Diameter

1.75 mm
2.85 mm

In Stock

Developed by Owens Corning, a world leader in composite solutions, XSTRAND™ GF30-PP filament for 3D printing is a reinforced material designed to be compatible with any standard Fused Filament Fabrication 3D printer (1.75 and 2.85 mm diameters available).

BENEFITS

High stiffness and strength (up to +200% compare to ABS)
Large operational temperature range (-20°C to 120°C)
Very good chemical and UV resistance
Very low moisture absorption
Excellent layer adhesion
Reduced warping effect compared to neat PP

POTENTIAL APPLICATIONS
XSTRAND™ GF30-PP is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure…

About XSTRAND™ 3D Fliament

XSTRAND™ GF30-PP and GF30-PA6 ensure high performance and wear resistance in the most extreme conditions. Developed with superior durability, XSTRAND™ products give you the ability to design and print parts on site in a fraction of the time at a fraction of the cost. Advantages include chemical and UV resistance, thermal stability, superior durability, easy to use, high performance, design flexibility and the ability to test solutions in real world conditions.

Reference PP-4452A050

Download

XSTRAND™ GF30-PP (TDS)

Download (413.31k)

XSTRAND™ GF30-PP (SDS)

Download (379.8k)

Printing Recommendations

XSTRAND - PP

Printer	Layer Height	Bed config.	Nozzle Temp (°C)	Bed Temp (°C)	Speed (mm/s)	Retraction (mm)	Brim/Raft	Heated Chamber
Ultimaker	0.2	Magigoo PPGF	270	100	50 mm/s	1	yes	N/A
Raise3D	0.2	Magigoo PPGF	240	100	50 mm/s	1	yes	N/A

XSTRAND - PA6

Printer	Layer Height	Bed config.	Nozzle Temp (°C)	Bed Temp (°C)	Speed (mm/s)	Retraction (mm)	Brim/Raft	Heated Chamber
Ultimaker	0.2	PrintaStick	255	80	45	2	no	N/A
Raise3D	0.2	PrintaStick	238	80	45	2	no	N/A

XSTRAND™ products are designed to be compatible with most open Fused Filament Fabricated 3D Printers.

WARNING: When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Printing with XSTRAND™ may reduce lifespan of brass nozzles and extruder driving wheels. It is advised to use hardened steel nozzles or ruby nozzles

Storage and Drying

XSTRAND™ filaments must be stored in a dark and temperate location. It is recommended that the product remain closed in its original packaging until use.

IMPORTANT NOTE: GF30-PA6 is very sensitive to moisture. For optimal printing results, the product must be dried at least 4 hours in the oven at 80°C prior to use, and stored in a dry case, even during printing.