BASF Ultrafuse PC/ABS FR 750 gr

50.34 €
Tax excluded
Not Rated
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA
Diameter

Volume discounts

QuantityPriceYou Save
447.82 €Up to 10.07 €
845.31 €Up to 40.27 €
1642.79 €Up to 120.82 €
Disponibile

Ultrafuse® PC/ABS FR Black is a V-0 flame retardant blend of Polycarbonate and ABS – two of the most used thermoplastics for engineering & electrical applications.

The combination of these two materials results in a premium material with a mix of the excellent mechanical properties of PC and the comparably low printing temperature of ABS.

Combined with a halogen free flame retardant, parts printed with Ultrafuse® PC/ABS FR Black feature great tensile and impact strength, higher thermal resistance than ABS and can fulfill the requirements of the UL94 V-0 standard.

Conform the European railway standard for fire safety EN45545-2:2016, R26 (EL 10)

 

 

Benefits at a Glance:

  • Halogen free flame retardant with a flame class rating v0 according to UL 94 (@1.5mm & 3.0mm)
  • Glow wire test
  • Outstanding aesthetics
  • Excellent mechanical properties
  • UV stabilized
  • Good printing performance on desktop printers

Applications and certifications:

  • Applications which require flame retardancy, for instance in automotive, transportation or consumer electronics
    • V0 flame class rating (UL94) @ 1.5mm and 3.0mm wall thickness printed parts
  • Housing for electronics
    • Glow wire test (GWEPT) 725°C @ 1.5mm and 960°C @ 3.0mm thickness
  • Additional testing for railway certification on going (R Class).
  • Strong layer adhesion
  • High print speeds possible
PC-4718B075
Nozzle Temperature 230-280 °C
Nozzle Diameter ≥ 0.4 mm
Bed Temperature 80-100 °C
Bed Modification Glass plate + adhesive
Print Speed 30-90 mm/s
Build Chamber Tempe­rature Passively heated, closed chamber

 

Drying Recommendations

The filament is delivered in a printable condition. To achieve best print results, please dry the filament at 60°C for at least 4 hours (vacuum oven preferred over a hot air dryer) and keep the filament dry in for instance a dry box.

Write your review

No customer reviews for the moment.

You might also like