BASF Ultrafuse PPSU | 750 gr
252.00 €
Tax excluded
Not Rated
BASF Ultrafuse PPSU
Weight: 750 gr
Diameter: 1,75 mm
Color: natural
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Ultrafuse® PPSU was specially developed for FFF printing based on BASF´s advanced Ultrason® materials. The Ultrason® resins are amorphous thermoplastics derived from polyethersulfone (PESU), polysulfone (PSU) and polyphenylsulfone (PPSU) and ensure very high thermal resistance.
With its wide spectrum of material performance advantages, Ultrafuse® PPSU can be successfully used in applications where other plastics, e.g. polyamide, polycarbonate, polyoxymethylene and polyalkylene terephthalates, fail to meet the performance specifications.
With its inherent flame retardant properties, it is an especially suitable material for the aerospace industry.
Ultrafuse® PPSU benefits at a glance:
- Inherently flame retardant
- Short-term temperature resistance up to 220 °C
- Resistant to long-term service temperatures up to 180 °C
- High dimensional stability
- Creep strength at high temperatures
- Resistant to hot water and coolants
- Oil-resistant, even at temperatures up to 170 °C
- Fuel and fluorine resistant
PPSU-4430A075
| Nozzle temperature | 390-410 °C |
| Nozzle diameter | ≥ 0.4 mm |
| Bed temperature | 220 °C |
| Bed modification | Glass, reinforced build sheet |
| Print speed | 25-50 mm/s |
| Drying recommendation | Vacuum dryer: 125°C, for 8 hours |
You might also like
BASF Ultrafuse PPSU
Weight: 750 gr
Diameter: 1,75 mm
Color: natural
No customer reviews for the moment.