• Reduced price

BEGO VarseoSmile Crown plus

279.20 € -20%
349.00 €
Tax excluded
Not Rated
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA
Weight
Color
In stock

Advantages for the laboratory

  • Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time
  • High dimensional stability and strength of the printed objects due to high values of flexural strength and flexural modulus – therefore precise fit
  • Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
  • Easy to grind and polish by using standard tools
  • Seven shades according to the proven VITA* classical shades:
    A1, A2, A3, B1, B3, C2, D3
  • Satisfies all the requirements for a Class IIa** medical device

Advantages for the patient

  • Excellent aesthetics thanks to a balanced ratio of opacity and translucency
  • Low tendency to age and discolor thanks to very low water absorption
  • Low plaque accumilation due to smooth surface
  • High comfort thanks to low cold and heat sensitivity
  • Antagonist-friendly material with mechanical buffering effect – ideal for implant-supported crowns
  • Minimized formation of secondary caries thanks to a high adhesive bond with luting composites
  • High biocompatibility due to very low water solubility – therefore not cytotoxic, not genotoxic, not toxic, not irritating, and not sensitizing

* This symbol is a commercial designation/registered trademark of a company which is not part of the BEGO company group.
** Class IIa medical device as defined by Directive 93/42/EEC

Individualization with stains

The individualization of the post-cured objects is possible with composite stains and is the responsibility of the user. Follow manufacturer‘s instructions.

Note for practitioners

VarseoSmile Crown plus can be attached using self-adhesive cements (e. g. RelyX Unicem*, 3M Espe*) or composite cement with a primer (e. g. Variolink Esthetic DC* and Monobond Plus*, Ivoclar Vivadent*). Observe the instructions for use of the luting agent.

41118
Color A1, A2, A3, B1, B3, C2, D3
Density approx. 1.4 – 1.5 g/cm³
Layer thickness 50 μm
Viscosity 2,500 – 6,000 MPa*s
Flexural strength 116 MPa
Flexural modulus 4,090 MPa
Water solubility 0.23 µg/mm³
Water sorption 3.6 µg/mm³
Wavelength 405 nm

Write your review

No customer reviews for the moment.

You might also like