impianto produzione additiva

In addition to providing Design and Reverse Engineering Services through the FastParts division, the Crea3D team supports companies in choosing and configuring the most suitable production systems for each sector of activity.

For all companies wishing to enter the world of additive manufacturing, or for those ready to convert their traditional systems into new automation and corporate interconnection processes, Crea3D offers pre-configured and modular production systems.


Why an additive manufacturing system


What is a Print Farm?

Having a series of 3D printers available allows you to manage mass production or optimize the rapid prototyping flow. The configuration of multiple 3D printers is essential to further reduce production times and costs.

And besides, if those 3D printers are all connected to the network, it is possible to launch and remotely monitor production processes, by optimizing procedures.

Photo: Florenradica (Italy), installation of 50 Ultimaker 3D printers



Ultimaker Connect

Ultimaker Connect is an integration of the Ultimaker Cura slicing software that allows you to control, monitor, and configure a group of Ultimaker 3Ultimaker 3 Extended, Ultimaker S3 o Ultimaker S5 3D printers, through a single interface, obtaining an effective production solution for your office or department.

Ultimaker Connect also allows you to schedule maintenance on all 3D printers connected to the network, sending reminders when operations are needed.




(Industrial components)

Initial savings of €350.000

Volkswagen Autoeuropa


-91% costs | -95% time

Jabil Auburn Hills


-30% costs | -80% time


Owens Cornings

(Chemical industry)

17.000 hrs of printing in a year, for product tests

Make Architects


-90% costs | -90% time

Duke University

(Education and Research)

Over 3.500 parts per month


Customized solutions and installations

After evaluating the most suitable solution, our specialized technicians will take care of the delivery and installation of the system, including the configuration of the network. In addition, there will be a training day that enables operators to use the installed printers correctly.

Fill in the form below to receive further information.


Information sent through this form will be used for the provision of the requested services. I have read and ACCEPT unreservedly the Privacy policy, and I AUTHORIZE the treatment of my personal data.