[IT] A seguito del Decreto del Presidente del Consiglio dei Ministri datato 22 marzo 2020, che ha stabilito ulteriori misure finalizzate al contenimento del COVID-19,
informiamo la clientela che gli ordini online potrebbero subire ritardi di 24/48 ore.

[EN] Following the Decree of the Prime Minister dated 22 March 2020, which established additional measures aimed at containing COVID-19,
we want to inform customers that online orders may be delayed of 24/48 hours.

Daylight Precision Mould Resin | 1Kg

78.00 €
Not Rated
In Stock

 

Daylight Precision Mould Resin

Ideal for the creation of high resolution silicone rubber moulds, we have Mould resin.
Parts can withstand the temperatures (up to 180°C) and pressure required for vulcanisation. Along with this the parts show great strength, smooth surfaces, and highly accurate prints.

 

Precision Mould has been designed for creating high definition jewellery parts especially for the Precision Printer.
The printed parts will display a high tensile strength, high accuracy and detail for the use in the modern jewellery market.
The parts printed with this resin withstand high temperatures (up to 180°C) and pressures required for vulcanizing.
Parts printed with the Precision Mould resin are ideal for the use as pattern in high resolution silicon rubber moulds.
The printed parts will display a smooth surface and a good surface finish.

Key benefits include high tensile strength, high accuracy, no shape deformation at elevated temperatures, smooth surface, easy to use and finish.

PREMDBU01
Color Blue
Viscosity
(At 25ºC Brookfield spindle 3)
700 cPs
Hardness
(After post exposure)
90 Shore D
Tensile strength
ASTM D638 (After Post Exposure, 1hr UV)
49 MPa
Elongation at break
ASTM D638 (After Post Exposure, 1hr UV)
2%
Storage 1050°C
Density 1.1 g/cm3

 

Processing Instructions

Follow procedure laid out in your 3D Liquid Crystal’s user manual.
Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times.
Liquid polymer is soluble in water and soap.

In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner followed by water.
The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties.

Write your review

No customer reviews for the moment.

You might also like