Draft Resin Formlabs 1L

135.00 €
Not Rated
In Stock

Draft Resin

for faster prints

Draft Resin is the fastest-printing Formlabs resin. Parts printed with Draft Resin print three to four times faster than parts printed with other Standard Resins.

The print speed of Draft Resin makes it ideal for same-day design iterations and printing bulky, full-build-volume parts in less than eight hours.

resina draft

Draft resin prints large parts quickly and meets the accuracy needs of prototyping.

Recommended for:

  • Bulky parts
  • Assemblies
  • Same-day design iterations
  • Quick concept prototyping

Not suitable for:

  • Parts with very fine details and small curves
  • Parts that require a very smooth surface finish
  • End-use parts that require specific mechanical properties
 

 

Printing with Draft Resin

Draft Resin prints at 300 microns. Due to this layer thickness, the Z axis is less accurate than Standard Resins, which print in smaller layers. Draft Resin’s accuracy in the X and Y axes is comparable with other Standard Resins. Draft is not recommended for parts with lots of curves or parts that require fine surface detail.

 

 

 

Post-curing is not required for Draft Resin. Post-curing will increase tensile strength and decrease elongation.

RS-F2-DRBL-01

Comparison with Other Formlabs Materials

Draft Resin
(green)
Draft
(post-cured for
5 min at room temp)
Draft
(post-cured for
5 min at 60 °C)
Clear Resin
(green)
Clear
(post-cured)
UTS (MPa) 23 28 36 38 65
Elongation (%) 17 10 7 12 6
Tensile Modulus (GPa) 0.9 1.3 1.6 1.6 2.8
Flex Modulus (GPa) 0.6 0.9 1.5 1.3 2.2
Notched IZOD (J/m) 35 35 21 16 25
HDT @ 1.8MPa (°C) 43.3 4.3 50.1 42.7 58.4
HDT @ 0.45MPa (°C) 50.6 50.7 63.4 49.7 73.1

Write your review

No customer reviews for the moment.

You might also like