- Reduced price
XSTRAND™ GF30-PP (Polypropylene + Glass Fiber)
48.00 €
-20%
60.00 €
Tax excluded
Not Rated
XSTRAND™ GF30-PP
Polypropylene + Glass Fiber
Diameter: 1.75/2.85 mm
Weight: 500 g
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Developed by Owens Corning, a world leader in composite solutions, XSTRAND™ GF30-PP filament for 3D printing is a reinforced material designed to be compatible with any standard Fused Filament Fabrication 3D printer (1.75 and 2.85 mm diameters available).
BENEFITS
- High stiffness and strength (up to +200% compare to ABS)
- Large operational temperature range (-20°C to 120°C)
- Very good chemical and UV resistance
- Very low moisture absorption
- Excellent layer adhesion
- Reduced warping effect compared to neat PP
POTENTIAL APPLICATIONS
XSTRAND™ GF30-PP is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports & leisure…
About XSTRAND™ 3D Fliament
XSTRAND™ GF30-PP and GF30-PA6 ensure high performance and wear resistance in the most extreme conditions. Developed with superior durability, XSTRAND™ products give you the ability to design and print parts on site in a fraction of the time at a fraction of the cost. Advantages include chemical and UV resistance, thermal stability, superior durability, easy to use, high performance, design flexibility and the ability to test solutions in real world conditions.
PP-4452A050
Printing Recommendations
XSTRAND - PP
| Printer | Layer Height | Bed config. | Nozzle Temp (°C) | Bed Temp (°C) | Speed (mm/s) | Retraction (mm) | Brim/Raft | Heated Chamber |
|---|---|---|---|---|---|---|---|---|
| Ultimaker | 0.2 | Magigoo PPGF | 270 | 100 | 50 mm/s | 1 | yes | N/A |
| Raise3D | 0.2 | Magigoo PPGF | 240 | 100 | 50 mm/s | 1 | yes | N/A |
XSTRAND - PA6
| Printer | Layer Height | Bed config. | Nozzle Temp (°C) | Bed Temp (°C) | Speed (mm/s) | Retraction (mm) | Brim/Raft | Heated Chamber |
|---|---|---|---|---|---|---|---|---|
| Ultimaker | 0.2 | PrintaStick | 255 | 80 | 45 | 2 | no | N/A |
| Raise3D | 0.2 | PrintaStick | 238 | 80 | 45 | 2 | no | N/A |
XSTRAND™ products are designed to be compatible with most open Fused Filament Fabricated 3D Printers.
WARNING: When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Printing with XSTRAND™ may reduce lifespan of brass nozzles and extruder driving wheels. It is advised to use hardened steel nozzles or ruby nozzles
Storage and Drying
XSTRAND™ filaments must be stored in a dark and temperate location. It is recommended that the product remain closed in its original packaging until use.
IMPORTANT NOTE: GF30-PA6 is very sensitive to moisture. For optimal printing results, the product must be dried at least 4 hours in the oven at 80°C prior to use, and stored in a dry case, even during printing.
You might also like
Customers who bought this product also bought:
XSTRAND™ GF30-PP
Polypropylene + Glass Fiber
Diameter: 1.75/2.85 mm
Weight: 500 g
No customer reviews for the moment.