Daylight Precision Model Grey Resin | 1Kg

66.00 €
Tax excluded
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA

Volume discounts

QuantityPriceYou Save
362.70 €Up to 9.90 €
659.40 €Up to 39.60 €
1256.10 €Up to 118.80 €
Delivery 15 business days

 

Daylight Precision Model Grey Resin

Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.

 

Precision Model resin has been developed for prototyping of highly detailed objects, for example figurines and jewellery models.
The prime colour of the resin allows customers to easily paint them in any colour and make their parts as realistic as possible.
This resin has an ultimate dry touch and smooth finish, which delivers satisfactory customer experience.
You will experience the benefits of extremely fast exposure times allowing you to hold the finest details required for jewellery market.
The solid material is tough, durable and long lasting provided it is stored in dry conditions away from sunlight.

PREMLGY01
Color Grey
Viscosity
(At 25ºC Brookfield spindle 3)
121 cPs
Hardness
(ASTM D2240 After post exposure)
52 Shore D
Tensile strength
(ASTM D638 After post exposure)
11 MPa
Tensile modulus
(ASTM D638 After post exposure)
560 MPa
Elongation at break
(ASTM D638 After post exposure)
5%
Storage 1050°C
Density 1.09 g/cm3

 

Processing Instructions

Follow the procedures laid out in your 3D Liquid Crystal user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. Object should be post cured under UV in water to remove any surface tack, followed by UV light at 80 °C for minimum of 1 hour to obtain the maximum tensile properties.

Write your review

1 Review

5/5
SODDISFATTO
5/5

Azienda seria affidabile e professionale.

FABIO M, 03/02/2021

You might also like