Daylight Precision Skin Safe Red Transparent Resin | 1Kg
66.00 €
Tax excluded
Not Rated
Compatible with Liquid Crystal Precision and Precision 1.5
Looking to print things to wear or get younger people more engaged with 3D printing? Our skin safe resin is the way forward. Specially created to ensure that the liquid components do not cause irritation to skin. Solid parts will be rigid, whilst thinner allowing some degree of manipulation before breaking. Ideal for the education market.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Daylight Precision Skin Safe Red Transparent Resin
Looking to print things to wear or get younger people more engaged with 3D printing? Our skin safe resin is the way forward.
Specially created to ensure that the liquid components do not cause irritation to skin.
Solid parts will be rigid, whilst thinner allowing some degree of manipulation before breaking.
Ideal for the education market.
PRESSAM01
| Color | Red |
| Viscosity (At 25ºC Brookfield spindle 3) |
100 cPs |
| Hardness ASTM D2240 (After post exposure) |
100 Shore A |
| Tensile strength ASTM D638 (After Post Exposure) |
3 MPa |
| Elongation at break ASTM D638 (After Post Exposure) |
6% |
| Storage | 10 |
| Density | 1.20 g/cm3 |
Processing Instructions
Follow the procedures laid out in your 3D Liquid Crystal user manual.
Resin should be poured into the tray away from direct sunlight. Resin can also be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times to avoid unwanted curing or contamination.
For optimal printing results, print parts on supports and remove supports after post-curing.
For optimal surface finish, use Photocentric Resin Cleaner for cleaning the 3D printed parts and wipe the parts dry using a tissue or cotton cloth.
Post-cure parts under UV for 60 minutes. Do not post-cure parts in water.
For better results, we recommend post curing parts for 60 minutes at 60 degrees.
Note:
Skin safe is non-irritant and non-skin sensitising.
If you are already sensitised to acrylates, you may still get irritation from Skin Safe resin.
You might also like
Compatible with Liquid Crystal Precision and Precision 1.5
Looking to print things to wear or get younger people more engaged with 3D printing? Our skin safe resin is the way forward. Specially created to ensure that the liquid components do not cause irritation to skin. Solid parts will be rigid, whilst thinner allowing some degree of manipulation before breaking. Ideal for the education market.
No customer reviews for the moment.