Raise3D Pro3 Plus

6249.00 €
Not Rated
Pre-order

Forged from the Pro2 Series, Raise3D’s newly launched Pro3 Series professional dual extruder 3D printers meet the needs of both production and multi-sized rapid prototyping, with high precision and round-the-clock stable operation. The Pro3 Series is comprised of the Pro3, with a build volume of 300x300x300mm, and the Pro3 Plus, with a build volume of 300x300x605mm, fulfilling the requirements of large-scale production and multi-sized rapid prototyping.

A high-quality printer design that includes enhanced features and a smart assistant system known as EVE, all of which make the Pro3 Series dual extruder 3D printers an excellent option for professional 3D printing.

Raise3D Pro3
 

The Pro3 Series dual extruder 3D printers connect with Raise3D’s 3D printing software ecosystem, that includes a 3D slicing program, ideaMaker, an open-software template called ideaMaker Library, and our cloud-based 3D printing software RaiseCloud.

 

Enhanced Printing Platform Features

The Pro3 Series features upgraded printing platform features for high-quality printing performance and a better overall experience.

  • The auto bed leveling makes setting up a 3D printer quicker and simpler.
  • The flexible build plate allows for the effortless removal of 3D printed parts.
  • The Z-axis rod stiffness increased by 75% to deliver a more stable performance.

These structural changes enable the Pro3 Series to provide better print results and an easier printing experience.


Raise3D Pro3
 
Raise3D Pro3

Interchangeable Hot End and Extruder Cover

The Pro3 Series is equipped with an independent modular extruder with a dual extrusion system. This allows the Pro3 Series to print using a variety of filaments, reduce clogging, and allow the convenient disassembly and replacement of components. The hot end of the Pro3 Series is easy to remove, which can be done without using tools, making it simple to replace and maintain. Users can also easily take off the front cover of the extruder to accurately locate common printing occurrences such as filament jams.

 

 

Air Flow Manager for Better Heat Dissipation

The Air Flow Manager of the Pro3 Series is located on the back of the printer, improving heat dissipation and air circulation, creating a stable environment inside the print chamber. Equipped with a HEPA air filter, Air Flow Manager can also filter and clean the air inside the chamber.

Raise3D Pro3

 

 
Raise3D Pro3

EVE Smart Assistant

The Pro3 Series has a built-in EVE assistant system, preloaded with common printing problems and corresponding solutions. The EVE assistant can guide users to accurately locate and resolve issues that could affect the final print job. The EVE assistant has a function that gives users reminders about regular scheduled interventions to ensure that printer maintenance is performed on time. It also helps reduce maintenance time and communication costs for an efficient maintenance process.

 

Professional Dual Extruder 3D Printers

A dual extruder 3D printer can perform more advanced functions such as producing dual color models and dual material models. A professional dual extruder 3D printer will have additional design features resulting in a higher quality print job.

The Pro3 Series professional dual extruder 3D printers have a single-side nozzle lifting technology with fast nozzle switching. Therefore, the nozzles can lift independently and switch within a second, and without being affected by 3D printing material or temperature.

Raise3D Pro3
 

Raise3D Pro3

High repeatability

< 0.005 mm, 5 micron

Raise3D Pro3

Lightning speed

< 1 second switching time

Raise3D Pro3

1.5 mm lifting distance

Compatible with flexible filaments

 
Raise3D Pro3


Power Loss Recovery

Either a power outage or a filament outage (when the filament runs out) can cause a print job to be lost if they occur in the middle of the 3D printing process. However, the Pro3 Series has a filament run-out sensor on its extruders to alert when the filament is about to run out and saves the print job. It also has a second-generation power loss function to save the printing status in the event of a power outage and can continue printing from the same point when power is restored.

 

 

Automatic Detection

Another safety feature of the Pro3 Series is that it can automatically detect when a door is opened and will immediately pause the print.

Raise3D Pro3
 

Other features

  • Material Compatibility
  • Flexible Build Plate
  • HEPA Air Filter
  • Touch Screen & Software Monitoring
  • Full Metal Frame



MORE INFORMATION


Information sent through this form will be used for the provision of the requested services. I have read and ACCEPT unreservedly the Privacy policy, and I AUTHORIZE the treatment of my personal data.

R3DPRO3PL

Download


Pro3 Pro3 Plus
GENERAL
Build Volume (W×D×H) Single Extruder Print: 300×300×300 mm
Dual Extruder Print: 255×300×300 mm
Single Extruder Print: 300×300×605 mm
Dual Extruder Print: 255×300×605 mm
Machine Size (W×D×H) 620×626×760 mm 620×626×1105 mm
Print Technology FFF
Print Head System Dual-head with electronic lifting system
Filament Diameter 1.75 mm
XYZ Step Size 0.78125, 0.78125, 0.078125 micron
Print Head Travel Speed 30–150 mm/s
Build Plate Flexible Steel Plate with Buildtak
Max Build Plate Temperature 120 ºC
Heated Bed Material Silicone
Build Plate Leveling Mesh-leveling with Flatness Detection
Filament Run-out Sensor Available
Supported Materials PLA / ABS / HIPS / PC / TPU / TPE / PETG / ASA / PP / PVA / Nylon / Glass Fiber Infused / Carbon Fiber Infused / Metal Fill / Wood Fill
Layer Height 0.01 – 0.25 mm
Nozzle Diameter 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
Max Nozzle Temperature 300 ºC
Connectivity Wi-Fi, LAN, USB port, Live camera
Noise Emission (Acoustic) <55 dB(A) when building
Operating Ambient Temperature 15-30 ºC, 10-90 % RH non-condensing
Storage Temperature -25 ℃ to +55 ℃, 10-90 % RH non-condensing
Filter HEPA filter with activated charcoal
EVE Smart Assistant Available
Net Weight 52.5 kg 61.15 kg
Gross Weight (Carton Only) 76.6 kg 87.45 kg
Gross Weight (Carton with Pallet) 84.55 kg 95.4 kg
ELECTRICAL
Power Supply Input 100-240 V AC, 50/60 Hz 230 V @3.3 A
Power Supply Output 24 V DC, 600 W
SOFTWARE
Slicing Software ideaMaker
Supported File Types STL/ OBJ/ 3MF/ OLTP
Supported OS WINDOWS/ macOS/ Linux
Machine Code Type GCODE
PRINTER CONTROLLER
User Interface 7-inch Touch Screen
Network Wi-Fi, Ethernet
Power Loss Recovery Available
Screen Resolution 1024×600
Motion Controller Atmel ARM Cortex-M4 120MHz FPU
Logic Controller NXP ARM Cortex-A9 Quad 1 GHz
Memory 1 GB
Onboard Flash 8 GB
OS Embedded Linux
Ports USB 2.0×2, Ethernet×1

Write your review

No customer reviews for the moment.

You might also like