Sinterit LISA PRO | SLS 3D Printer
Not Rated
PA11 Onyx FRESH
280.00 €
Tax excluded
Not Rated
PA11 Onyx
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
Fresh Powder is a virgin powder, used only to refresh powder properties lost during last print (sintering process).
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
PA11 Onyx
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
PA11 features:
- High resistance against impacts
- Moderate elasticity
- Good chemical resistance
- Dedicated only for LISA Pro
Material type: Nylon 11
Tensile Strength: 54 [MPa]
Elongation at Break: 40%
Melting point: 201°C
Applications:
- Jigs, fixtures,
- tools elements,
- covers, housings, enclosures,
- snap-fit designs,
- handles, hinges, connectors,
- impact-proof elements,
- thermoforming molds.
FZ055
| Category | Powder for SLS printing |
| Material type | Nylon 11 |
| Packaging | Plastic bottle |
| Granulation | 20 – 80 [μm] |
| Colour | Navy Grey |
| Elongation at Break | 40 [%] |
| Tensile Strength | 54 [MPa] |
| Shore hardness in scale D | 76 |
| Material refreshing ratio | 33% – to reuse leftover PA11 powder add 33% of FRESH powder. |
| Dedicated for | Lisa Pro |
You might also like
PA11 Onyx
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
Fresh Powder is a virgin powder, used only to refresh powder properties lost during last print (sintering process).
No customer reviews for the moment.