Ultimaker PVA | 2.85mm | 750gr

93.45 €
Not Rated
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate con Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
compra hasta 3.000€ y paga en 3 plazos con  paga en 3 plazos con Klarna
achetez jusqu'à 3.000€ et payez en 3 fois avec  payez en 3 fois avec Klarna
prodotto presente su  Crea3D è presente su MEPA

Volume discounts

QuantityPriceYou Save
488.78 €Up to 18.69 €
884.11 €Up to 74.76 €
1279.43 €Up to 168.21 €
In Stock

With a good thermal stability, Ultimaker PVA is ideal for printing complex models that require supports for large overhangs, deep internal cavities, and intricate geometries. Designed for a seamless 3D printing experience, our PVA provides good adhesion to both PLA and Nylon.

Reasons to choose Ultimaker PVA
- Good thermal stability resulting in better degradation resistance compared to other PVA filaments 
- Less moisture sensitive than other PVA filaments
- Great adhesion to both PLA and Nylon
- Safe dissolution in tap water (no harmful chemicals required)
- Biodegradable with no hazardous by-products

Dual extrusion info
PVA allows to effortlessly create complex 3D prints by building water soluble support structures.
1. Submerge: Put your 3D print in cold or warm water depending on the build material.
2. Rinse: After PVA supports are dissolved, rinse the 3D print to remove any excess PVA solution.
3. Dry: Let the 3D print dry and apply additional post processing to the build material if necessary.

Ultimaker PVA and Ultimaker 3/S5
As a water soluble support material, Ultimaker PVA empowers engineers and designers to create highly detailed surfaces and complex moving mechanical parts in just one run. Coupled with the right build materials and our proven material profiles in Ultimaker Cura for Ultimaker 3 and Ultimaker S5, our PVA opens up a whole new world of opportunities for intricate designs and versatile applications.

9731

Not available.

Write your review

No customer reviews for the moment.

You might also like