ABS (acrylonitrile butadiene styrene) is one of the most common technical materials in several industries around the globe.

BVOH (Butenediol vinyl alcohol copolymer) is a water-soluble thermoplastic optimized for the FFF manufacturing process.

PA (Polyamide) is an engineering plastic, characterised by its great resistance to impact and able to work continuously at a temperature of up to 120 ºC for an extended period of time.

PAHT CF15 (High Temperature Polyamide carbon fiber reinforced) combines high temperature and chemical resistance with extreme mechanical properties.

Il PET CF15 (polietilene tereftalato rinforzato con fibra di carbonio) è il materiale più semplice da stampare caricato con fibra di carbonio, e può essere stampato direttamente su vetro.

PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break.

PP GF30 (Polypropylene 30% glass fibre) is a composite filament, filled with glass fibre for chemically resistant, lightweight and dimensionally stable parts.

PP (Polypropylene) is a semycrystalline thermoplastic, known for its resistance to chemical agents.

PVA (Polyvinyl alcohol) is a water-soluble thermoplastic, widely adopted as a support material for FFF 3D printers.

TPU (Thermoplastic polyurethane) is an elastomeric copolymer, made up of alternating soft and hard blocks, which give hardness and flexibility at the same time.