Photocentric Cure M+
3030.00 €
IVA esclusa
Photocentric Cure M+
Strengthen Parts. Maximise Material Properties.
Professional, reliable and tailored for your printer. Cure M+ optimises strengthening and drying of models to maximise material properties and complete the process.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Photocentric Cure M+
Strengthen Parts. Maximise Material Properties.
Professional, reliable and tailored for your printer.
Cure M+ optimises strengthening and drying of models to maximise material properties and complete the process.
Large chamber volume
Cure M+ takes the full Dental platform eliminating the need to remove printed parts beforehand.
Time regulated control
Digital timer control, set your time and leave your prints to cure.
Strong Parts with peak properties
15-20 minutes your printed parts will be dry and strong with material properties at their full potential.
PC002949
Dimensions
External: 390 (H) x 440 (D) x 440 (W) mm
Internal: 350 (H) x 270 (D) x 260 (W) mm
System
User Interface
Display
Thermostat and digital timer control
Light Source
UV Led 100pcs 405nm wavelength
Power Source
Input: 110-240V
Heating
0-65°C
Drying Time
15-120 minutes
Printer Compatibility
LC Dental, LC Precision/1.5, LCHR2/HR
Potrebbero anche piacerti
Photocentric Cure M+
Strengthen Parts. Maximise Material Properties.
Professional, reliable and tailored for your printer. Cure M+ optimises strengthening and drying of models to maximise material properties and complete the process.
Nessuna recensione per il momento.