[IT] A seguito del Decreto del Presidente del Consiglio dei Ministri datato 22 marzo 2020, che ha stabilito ulteriori misure finalizzate al contenimento del COVID-19,
informiamo la clientela che gli ordini online saranno evasi a partire dal 06 Aprile 2020, salvo ulteriori decisioni.

[EN] Following the Decree of the Prime Minister dated 22 March 2020, which established additional measures aimed at containing COVID-19,
we want to inform customers that online orders will be processed starting from 06 April 2020, unless further decisions are made.

Daylight Precision Model Resin | 1Kg

66.00 €
Disponibile

 

Daylight Precision Model Resin

Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.

 

Precision Model resin has been developed for prototyping of highly detailed objects, for example figurines and jewellery models.
The prime colour of the resin allows customers to easily paint them in any colour and make their parts as realistic as possible.
This resin has an ultimate dry touch and smooth finish, which delivers satisfactory customer experience.
You will experience the benefits of extremely fast exposure times allowing you to hold the finest details required for jewellery market.
The solid material is tough, durable and long lasting provided it is stored in dry conditions away from sunlight.

BR3D01-MODEL
Color Grey
Viscosity
(At 25ºC Brookfield spindle 3)
121 cPs
Hardness
(ASTM D2240 After post exposure)
52 Shore D
Tensile strength
(ASTM D638 After post exposure)
11 MPa
Tensile modulus
(ASTM D638 After post exposure)
560 MPa
Elongation at break
(ASTM D638 After post exposure)
5%
Storage 1050°C
Density 1.09 g/cm3

 

Processing Instructions

Follow the procedures laid out in your 3D Liquid Crystal user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. Object should be post cured under UV in water to remove any surface tack, followed by UV light at 80 °C for minimum of 1 hour to obtain the maximum tensile properties.

Scrivi la tua recensione

Nessuna recensione per il momento.

Potrebbero anche piacerti