[IT] A seguito del Decreto del Presidente del Consiglio dei Ministri datato 22 marzo 2020, che ha stabilito ulteriori misure finalizzate al contenimento del COVID-19,
informiamo la clientela che gli ordini online saranno evasi a partire dal 06 Aprile 2020, salvo ulteriori decisioni.

[EN] Following the Decree of the Prime Minister dated 22 March 2020, which established additional measures aimed at containing COVID-19,
we want to inform customers that online orders will be processed starting from 06 April 2020, unless further decisions are made.

Daylight Precision Concept Resin | 1Kg

78.00 €


Daylight Precision Concept Resin

Bring your jewellery and model figurines to life with Concept. Print perfect jewellery prototypes or detailed figurines with high strength, durability, and most importantly high accuracy with finished smooth surfaces.

Jewellery prints can be shown as is or easily painted by airbrush. For painting models, we recommend printing in Precision Model resin for the best paint results, using Concept resin for purely illustrating high detail.

Color Green
(At 25ºC Brookfield spindle 3)
690 cPs
(After post exposure)
92 Shore D
Tensile strength
ASTM D638 (After Post Exposure, 1hr UV)
45 MPa
Elongation at break
ASTM D638 (After Post Exposure, 1hr UV)
Storage 1050°C
Density 1.1 g/cm3


Processing Instructions

Follow procedure laid out in your 3D Liquid Crystal’s user manual.
Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times.

Liquid polymer is soluble in water and soap. In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner, followed by water.

The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties. Alternatively, the parts can be post exposed on water under UV for 30 minutes.

Scrivi la tua recensione

Nessuna recensione per il momento.

Potrebbero anche piacerti