Kimya TPU-92A | 750g
42.00 €
IVA esclusa
Kimya TPU-92A 3D Filament
The Kimya TPU-92A 3D filament belongs to the thermoplastic polyurethane (TPU) family.
It offers good resistance to heat and to the external environment as well as a Shore hardness of 92A.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
The Kimya TPU-92A 3D filament belongs to the thermoplastic polyurethane (TPU) family. It offers good resistance to heat and to the external environment as well as a Shore hardness of 92A.
It can be used to print flexible, resistant parts. The Kimya TPU-92A 3D filament is used in the food, electronics, automotive and consumer goods sectors.
It offers the following properties:
- Flexibility
- Resistance to abrasion
- Food contact certification EU 10/2011 and FDA 21 CFR (except black color)
- Complies with the RoHS and REACH standards
PE2015TQ
FILAMENT PROPERTIES
| PROPERTIES | TEST METHODS | VALUES |
|---|---|---|
| Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
| Density | ISO 1183-1 | 1.159 g/cm3 |
| Moisture rate | INS-6711 | < 1 % |
| Melt flow index (MFI) | ISO 1133-1 (@210°C – 2,16 kg) | 16.5 g/10min |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION | XY |
|---|---|
| Printing Speed | 20-70 mm/s |
| Infill | 100% - rectilinear |
| Infill Angle | 45°/-45° |
| Nozzle Temperature | 210-250°C |
| Bed T° | 60-90°C |
PRINTED SPECIMENS PROPERTIES
| PROPERTIES | TEST METHODS | VALUES | |
|---|---|---|---|
| MECHANICAL PROPERTIES | Tensile modulus | ISO 37/2/500 | 90 MPa |
| Tensile Strength | ISO 37/2/500 | 43.1 MPa | |
| Tensile strain at strength | ISO 37/2/500 | 350 % | |
| Tensile Stress at Break | ISO 37/2/500 | 41.7 MPa | |
| Tensile strain at break | ISO 37/2/500 | 351.6 % | |
| Flexural modulus | ISO 178 | 81 MPa | |
| Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 3 MPa | |
| Charpy impact resistance | ISO 179-1/1eA | No Break | |
| Shore Hardness | ISO 868 | 92A |
| Note 1 | *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Created on 13/03/2018 - Revised on 29/07/2019.
Potrebbero anche piacerti
I clienti che hanno acquistato questo prodotto hanno comprato anche:
- Prezzo scontato
Kimya TPU-92A 3D Filament
The Kimya TPU-92A 3D filament belongs to the thermoplastic polyurethane (TPU) family.
It offers good resistance to heat and to the external environment as well as a Shore hardness of 92A.
Nessuna recensione per il momento.