BCN3D Tough PLA | 2.85mm | 750g

40.00 €



Tough PLA (Polylactic Acid) is engineered for its high impact resistance and strength, similar to those of ABS, in combination with the stiffness of PLA.

This material shows excellent results in layer adhesion and is the perfect match for tooling or manufacturing aids where a high impact is needed. Tough PLA is an easy to print material with a very good surface quality.

Compatibility: All BCN3D Printers.


  • Manufacturing aids
  • Manufacturing tools
  • Functional prototyping
  • End-use parts
  • Alternative to ABS for large prints


  • High impact and stiffness
  • Easy to print
  • Excellent surface quality
  • Alternative to ABS


Technical information

Ideal for manufacturing stiff parts

Tough PLA is 50% stiffer than ABS, and has the right balance of toughness and stiffness.



A good balance between temperature resistance and toughness

Thanks to its toughness, Tough PLA becomes the ideal material for indestructible end-use parts, while counting on a lower heat resistance than PET-G.


Parametri di stampa

Temp. estrusore 190 - 220 °C
Temp. piano di stampa 45 - 60 °C
Ventola di raffreddamento 100%
Velocità 25 - 60mm/s
Altezza layer min. 0.15 - 0.4mm

Scrivi la tua recensione

Nessuna recensione per il momento.

Potrebbero anche piacerti