Daylight Precision Concept Green Resin | 1Kg

78.00 €
IVA esclusa
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA

Sconti quantità

QuantitàPrezzoRisparmio
374.10 €Fino a 11.70 €
670.20 €Fino a 46.80 €
1266.30 €Fino a 140.40 €
Consegna 15 giorni lavorativi

 

Daylight Precision Concept Green Resin

Bring your jewellery and model figurines to life with Concept. Print perfect jewellery prototypes or detailed figurines with high strength, durability, and most importantly high accuracy with finished smooth surfaces.

Jewellery prints can be shown as is or easily painted by airbrush. For painting models, we recommend printing in Precision Model resin for the best paint results, using Concept resin for purely illustrating high detail.

 
PRECNGN01
Color Green
Viscosity
(At 25ºC Brookfield spindle 3)
690 cPs
Hardness
(After post exposure)
92 Shore D
Tensile strength
ASTM D638 (After Post Exposure, 1hr UV)
45 MPa
Elongation at break
ASTM D638 (After Post Exposure, 1hr UV)
2%
Storage 1050°C
Density 1.1 g/cm3

 

Processing Instructions

Follow procedure laid out in your 3D Liquid Crystal’s user manual.
Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times.

Liquid polymer is soluble in water and soap. In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner, followed by water.

The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties. Alternatively, the parts can be post exposed on water under UV for 30 minutes.

Scrivi la tua recensione

Nessuna recensione per il momento.

Potrebbero anche piacerti