Steel Nozzle with WS2 Coating
49.99 €
IVA esclusa
Steel Nozzle with WS2 Coating
Suitable for composite filaments with abrasive additives
- Pro2 Series
- Pro3 Series
- E2
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Various sizes at 0.4/0.6/0.8mm, suitable for 1.75mm filaments.
Product Characters:
- Abrasion resistance
- High-Temperature resistance
- Low friction coefficient as 0.03 with WS2 Coating; restrain to filament accumulation; being stable in chemical properties; being non-toxic, non-corrosive and insoluble
- Good lubrication and anti-abrasive performance under the highest temperature at 450℃
- Ultra low thrust for filament fluidity
Material Characteristic:
- Mohs Hardness: 7.8
- Max. Print Temp: 450°C
- Coefficient of Heat Conductivity: 26W/m.k
- CTE: 12μm/m. °C
In addition to being suitable for normal filaments, the nozzle is also especially suitable for those composite filaments with abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten, phosphorescent pigment, etc., and those high-temperature-resistant filaments.
3011999060A01
Potrebbero anche piacerti
I clienti che hanno acquistato questo prodotto hanno comprato anche:
- Prezzo scontato
Steel Nozzle with WS2 Coating
Suitable for composite filaments with abrasive additives
- Pro2 Series
- Pro3 Series
- E2
Nessuna recensione per il momento.