Kimya ABS Carbon Filament
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers.

Kimya ABS Kevlar Filament
The Kimya ABS Kevlar 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene Kevlar (ABS Kevlar) is a composite filament enriched in aramid fibers.

Kimya ABS-EC
The Kimya ABS-EC 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene electrical conductor (ABS-EC) is a combination of ABS and electrically active additives: carbon nanotubes.

Kimya ABS-ESD Filament
The Kimya ABS-ESD 3D filament belongs to the styrenic polymer family. ABS-ESD is an Acrylonitrile Butadiene Styrene to which an additive has been added to give it Electro Static Discharge properties.

ABS-R 3D Filament
Kimya ABS-R 3D filament is a standard ABS based on 100% post-consumer recycled material

Kimya ABS-S Filament
The 3D filament Kimya ABS-S belongs to the styrenic polymer family. Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer offering high impact resistance and is relatively rigid and lightweight.

Kimya ASA-S Filament
The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use.

Kimya HIPS-R
The Kimya HIPS-R 3D filament belongs to the styrenic polymer family. This High Impact PolyStyrene (HIPS) is a thermoplastic formulated from recycled materials and which –despite being recycled– boasts good resistance to impact and heat. 

Kimya PA6-CO Filament
The Kimya PA6-CO filament is a co-polymer based on a Nylon 6 grade. This unfilled polyamide has excellent tensile strength and very low warping behavior.

PC-S 3D Filament
The Kimya PC-S 3D filament is an amorphous thermoplastic. Polycarbonate (PC) is a transparent plastic. It offers high resistance to heat.

PEBA-S 3D Filament (PEBAX®)
The Kimya PEBA-S 3D filament is a thermoplastic elastomer. Polyether block amide (PEBA) is produced via polycondensation of a carboxylic acid polyamide with an alcohol-terminated polyether.

Kimya PEKK-A 3D Filament (KEPSTAN®)
The Kimya PEKK-A 3D filament belongs to the polyaryletherketone family.
Polyetherketoneketone (PEKK) is a thermoplastic polymer.
PEKK-A is the amorphous form of PEKK, providing ease of printing.

Kimya PETG Carbon 3D Filament
The Kimya PETG Carbon 3D filament is a mixture of PETG and carbon fibers. The addition of carbon fibers to PETG provides high levels of mechanical performance.

PETG-R 3D Filament
Kimya PETG-R (“-R for recycled”) 3D filament is formulated using materials from the industrial waste of a luxury and medical packaging products company.

PETG-S 3D Filament
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer.

PLA-R 3D Filament
The 3D filament Kimya PLA-R is a recycled and biodegradable polymer: this biosourced homopolymer can be obtained from corn starch.

Kimya Tough PLA-HI
The Kimya Tough PLA-HI 3D filament  is a biosourced polymer obtained from corn starch. Polylactic Acid -HI (PLA-HI) is a “High Impact” filament offering increased impact resistance

Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). 

Kimya TPU-92A 3D Filament
The Kimya TPU-92A 3D filament belongs to the thermoplastic polyurethane (TPU) family.
It offers good resistance to heat and to the external environment as well as a Shore hardness of 92A.

TPU-R 3D Filament
Thermoplastic “-R” polyurethane (TPU-R) is formulated using recycled materials.