Kimya TPC-91A | 750g
44.00 €
Tax excluded
Not Rated
Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment).
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). It offers chemical and impact resistance. It provides Shore hardness of 91 A. It can be used to produce flexible parts. The Kimya TPC-91A 3D filament can be used in industrial applications in sectors such as electronics, textiles, roofing, etc., and in decorative and leisure 3D printing applications. It offers the following properties:
- Flexibility
- Easy to print
- Elongation > 500%
- Complies with the REACH regulation and the RoHS directive
Store away from light, humidity and heat to maintain the properties of the product.
PE1006TQ
FILAMENT PROPERTIES
| PROPERTIES | TEST METHODS | VALUES |
|---|---|---|
| Diameter | INS-6712 | 1.75 ± 0.1 mm 2.85 ± 0.1 mm |
| Density | ISO 1183-1 | 1.22 g/cm3 |
| Moisture rate | INS-6711 | < 0.5 % |
| Melt flow index (MFI) | ISO 1133-1 | 18 - 20 g/10min |
| Melting Temperature (Tm) | ISO 11357-1 DSC (10°C/min – 20-220°C) | 159 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION | XY |
|---|---|
| Printing Speed | 44 mm/s |
| Infill | 100% - rectilinear |
| Infill Angle | 45°/-45° |
| Nozzle Temperature | 260°C |
| Bed T° | 60°C |
PRINTED SPECIMENS PROPERTIES
| PROPERTIES | TEST METHODS | VALUES | |
|---|---|---|---|
| MECHANICAL PROPERTIES | Tensile modulus | ISO 37/2/500 | 67 MPa |
| Tensile Strength | ISO 37/2/500 | 17.7 MPa | |
| Tensile strain at strength | ISO 37/2/500 | > 500 % | |
| Tensile Stress at Break | ISO 37/2/500 | 17.5 MPa | |
| Tensile strain at break (type A) | ISO 37/2/500 | > 500 % | |
| Flexural modulus | ISO 178 | 66 MPa | |
| Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 2.6 MPa | |
| Charpy impact resistance | ISO 179-1/1eA | No Break | |
| Shore Hardness | ISO 868 | 91A |
| Note 1 | *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Created on 01/07/2019 - Revised on 13/03/2023.
You might also like
Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment).
No customer reviews for the moment.