Kimya ABS Carbon Filament
The Kimya ABS Carbon 3D filament belongs to the styrenic polymer family. Acrylonitrile-butadiene-styrene-carbon (ABS Carbon) is a mixture of ABS and carbon fibers.

Kimya ABS-EC
The Kimya ABS-EC 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene electrical conductor (ABS-EC) is a combination of ABS and electrically active additives: carbon nanotubes.

Kimya ABS-S Filament
The 3D filament Kimya ABS-S belongs to the styrenic polymer family. Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer offering high impact resistance and is relatively rigid and lightweight.

Kimya ASA-S Filament
The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use.

Kimya HIPS-R
The Kimya HIPS-R 3D filament belongs to the styrenic polymer family. This High Impact PolyStyrene (HIPS) is a thermoplastic formulated from recycled materials and which –despite being recycled– boasts good resistance to impact and heat. 

Kimya PA6-CO Filament
The Kimya PA6-CO filament is a co-polymer based on a Nylon 6 grade. This unfilled polyamide has excellent tensile strength and very low warping behavior.

Kimya PEI-1010
The Kimya PEI-1010 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. It benefits from good resistance to temperature and solvents, as well as high dimensional stability.

Kimya PEI-9085
The Kimya PEI-9085 3D filament belongs to the family of thermoplastic polyimides. Polyetherimide (PEI) is an amorphous thermoplastic. If benefits from good resistance to temperature, high resistance to abrasion and high dimensional stability.

Kimya PPS-U Filament
The Kimya PPSU-S 3D filament belongs to the polysulfone family. Polyphenylsulfone (PPSU) is an amorphous thermoplastic. It is a technical material with an elevated glass transition temperature and low humidity absorption.

Kimya Tough PLA-HI
The Kimya Tough PLA-HI 3D filament  is a biosourced polymer obtained from corn starch. Polylactic Acid -HI (PLA-HI) is a “High Impact” filament offering increased impact resistance

Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). 

Kimya TPC-ESD
The Kimya TPC-ESD 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). Its “-ESD” formulation also provides protection against electrostatic discharge.