Kimya ABS-ESD Filament
The Kimya ABS-ESD 3D filament belongs to the styrenic polymer family. ABS-ESD is an Acrylonitrile Butadiene Styrene to which an additive has been added to give it Electro Static Discharge properties.

Kimya PEKK-A 3D Filament (KEPSTAN®)
The Kimya PEKK-A 3D filament belongs to the polyaryletherketone family.
Polyetherketoneketone (PEKK) is a thermoplastic polymer.
PEKK-A is the amorphous form of PEKK, providing ease of printing.

PETG-S 3D Filament
The 3D filament Kimya PETG-S is produced via copolymerization with PET. Polyethylene terephtalate glycol (PETG) is a saturated polyester polymer.

Kimya ABS-S Filament
The 3D filament Kimya ABS-S belongs to the styrenic polymer family. Acrylonitrile butadiene styrene (ABS) is a thermoplastic polymer offering high impact resistance and is relatively rigid and lightweight.

ABS-R 3D Filament
Kimya ABS-R 3D filament is a standard ABS based on 100% post-consumer recycled material

PLA-R 3D Filament
The 3D filament Kimya PLA-R is a recycled and biodegradable polymer: this biosourced homopolymer can be obtained from corn starch.

Kimya Tough PLA-HI
The Kimya Tough PLA-HI 3D filament  is a biosourced polymer obtained from corn starch. Polylactic Acid -HI (PLA-HI) is a “High Impact” filament offering increased impact resistance

Kimya TPC-91A
The Kimya TPC -91A 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is an elastomer obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). 

Kimya TPC-ESD
The Kimya TPC-ESD 3D filament belongs to the thermoplastic copolyester family: is an elastomer. TPC is obtained by copolymerization of two types of monomers: an ester (a rigid segment) and an ether (a flexible segment). Its “-ESD” formulation also provides protection against electrostatic discharge.

Kimya PA6-CO Filament
The Kimya PA6-CO filament is a co-polymer based on a Nylon 6 grade. This unfilled polyamide has excellent tensile strength and very low warping behavior.

Kimya ASA-S Filament
The 3D filament Kimya ASA-S belongs to the styrenic polymer family. Acrylonitrile styrene acrylate (ASA) is an opaque thermoplastic terpolymer. ASA offers properties close to ABS but is suitable for long-term external use.

Kimya PEI Support for Ultem
The Kimya PEI Support filament is a detachable support material to be used with both Kimya PEI-9085 and Kimya PEI-1010, filaments based on SABIC’s ULTEM. 

Kimya PEKK Carbon
The Kimya PEKK Carbon 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a thermoplastic polymer reinforced with carbon fiber.