BASF Ultrafuse TPU 95A | 750 gr
33.71 €
Tax excluded
Not Rated
BASF Ultrafuse TPU 95A
Developed specificially to enable fast and easy printing with a flexible filament for Fused Filament Fabrication.
fai acquisti fino a 3.000€ e paga in 3 rate con 
buy up to €3.000 and pay in 3 with
prodotto presente su 
Ultrafuse® TPU 95A has been developed specificially to enable fast and easy printing with a flexible filament for Fused Filament Fabrication. By building on the legacy of BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency.
With its outstanding abrasion resistance, Ultrafuse® TPU 95A presents an excellent choice for wear and tear applications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion and a god resistance to oils as well as industrially used chemicals.
Ultrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades.
Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.
Benefits
- Perfect for fast printing
- High abrasion resistance
- Easy to handle
- Good resistance to oils and common industrially used chemicals
- Printable on direct drive and bowden style printers
Applications
- Functional flexible parts
- Wear and tear application
TPU-2308B075
Material Properties
| Shore A Hardness | 92 |
| Abrasion Resistance | 64mm3 |
| Compression set at 23°C, 72h | 38% |
| Stress at Break | 44.2 MPa (XY), 12.2 MPa (ZX) |
| Elongation at Break | 661 % (XY), 192% (ZX) |
| Tear Strength | 90 kN/m (XY), 8 kN/m (XZ), 14 kN/m (ZX) |
Printing Guidelines*
| Nozzle Temperature | 210-230 °C |
| Bed Temperature | 40°C |
| Bed Material | Glass |
| Nozzle Diameter | ≥ 0.4 mm |
| Print Speed | 14-40 mm/s |
*The product data is provided in good faith and represents typical properties based on our current knowledge and experience; these data are not to be construed as specification limits or mini- mum values. Product properties may be changed without notice. This document does not create any liability, warranty or guarantee of product performance. It is the buyer’s responsibility to determine the suitability of Ultrafuse® products for the intended application.
You might also like
Customers who bought this product also bought:
- Reduced price
BASF Ultrafuse TPU 95A
Developed specificially to enable fast and easy printing with a flexible filament for Fused Filament Fabrication.
No customer reviews for the moment.