Intamsys PEEK | 1.75mm | 500G

348.00 €
Not Rated
fai acquisti fino a 3.000€ e paga in 3 rate con  paga a rate Klarna
buy up to €3.000 and pay in 3 with  pay in 3 with Klarna
prodotto presente su  Crea3D è presente su MEPA
In-Stock

Poly Ether Ether Ketone (PEEK) polymers are obtained by step-growth polymerization. 

PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. 
PEEK is regarded as one of the highest performing engineering thermoplastics in the world. 
PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

The INTAMSYS PEEK Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the INTAMSYS PEEK Filament particularly suitable for usage in FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

PEEK

1108-0002

Download


Physical Properties

Property Testing Method Typical Value
Density ISO 1183 1,26 g/cm3

 

Mechanical Properties

Property Testing Method Typical Value
Tensile Stress ISO 527-2 3700 Mpa
Flexural Modulus ISO 178 4300 Mpa
Impact strength Notched Izod ISO 180 19 Kj/m²

Write your review

No customer reviews for the moment.

You might also like