Flexa Black
FLEXA Black
Materiale TPU elastico per uso generale per la prototipazione. Allungamento ragionevole e facilità d'uso.
Caratteristiche:
- stampe flessibili con maggiore estensibilità
- durezza regolabile
- riutilizzabile al 100%
Applicazioni:
- articoli in gomma standard
- prototipi e progetti
- assorbitori di urti e vibrazioni
- dispositivi di protezione
General information
Material type | TPU |
Dedicated for | Lisa Pro, Lisa X |
Software | Sinterit Studio Basic |
Material refreshing ratio¹ | 0² % |
Color | Black |
Nitrogen needed | No |
Mechanical properties
Tensile Strength | 3.7³ MPa | PN-EN ISO 37:2007 |
Elongation at Break | 136 % | PN-EN ISO 37:2007 |
Shore hardness in type A scale | 70 / 90⁴ | PN-EN ISO 868:2005 |
Thermal properties
Melting point | 160°C | Internal procedure |
Softening point (Vicat method type A50) | 67.6 °C | PN-EN ISO 306:2014-02 |
2 Flexa materials has 100 [%] of usability. Although to keep the parameters of printouts as high as possible, we recommend adding 10% of fresh powder each time
3 It might need additional refresh with 50% in case of drop of surface quality (every few to over a dozen printouts).
4 Depending on printing settings and the design
Nessuna recensione per il momento.