PROMOZIONI attive  Italiano  Filamenti Kimya - Fabbrix - Solvay - Aquasys  |  Bambu Lab X1E Farm  |  Stampanti 3D UltiMaker

Active PROMOTIONS  English  Kimya - Fabbrix - Solvay - Aquasys Filaments  |  Bambu Lab X1E Farm  |  UltiMaker 3D printers

PROMOCIONES activas  Español  Filamentos Kimya - Fabbrix - Solvay - Aquasys  |  Bambu Lab X1E Farm  |  Impresoras 3D UltiMaker

PROMOTIONS actives  Français  Filaments Kimya - Fabbrix - Solvay - Aquasys  |  Bambu Lab X1E Farm  |  Imprimantes 3D UltiMaker

Aktive WERBEAKTIONEN  Deutsch  Kimya - Fabbrix - Solvay - Aquasys Filamente  |  Bambu Lab X1E Farm  |  UltiMaker 3D-Drucker

  • Reduced price

Fabbrix® PET 750g

15.31 € -25%
20.41 €
paga in 3 rate con Klarna
pay in 3 with Klarna
paga en 3 plazos con Klarna
payez en 3 fois avec Klarna
Zahlen Sie in 3 Raten mit Klarna
prodotto presente su  Crea3D è presente su MEPA
Color
Diameter
In Stock

fabbrix PET


PET is a versatile material, one of the most used types of plastic in the world.
Good layer adhesion, stronger than PLA.

PET is widely used to produce food and beverage containers and bottles.
It can be printed with water-soluble PVA support material.

The filament has been tested on 3D printers of the main brands (Ultimaker, Raise3D, Zortrax)

FPT010075
Properties Value
Suggested print temperature 210-230°C
Suggested print speed 30 - 70 mm/s
Suggested bed temperature 75-85°C

Write your review

1 Review

4/5
Ottimo materiale
4/5

Si stampa facilmente, resistente e flessibile.

Paolo M, 10/05/2018

You might also like