Reduced price

[PROMO] UltiMaker S5 + Air Manager

4500.00 € Save 2193.56 €

6298.00 €

Tax excluded

Not Rated

Add Review

PROMO Crea3D
Ultimaker S5 3D printer + Air Manager

DEMO printer used internally or during events and fairs.
EXCELLENT CONDITION

fai acquisti fino a 3.000€ e paga in 3 rate con

buy up to €3.000 and pay in 3 with

prodotto presente su

ultimaker s5

ultimaker S5

Enhanced reliability

Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.

Bigger build volume

A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches), combined with Ultimaker’s reliable dual extrusion and water-soluble support, gives even more freedom to realize your designs or print multiple parts in one go so you can meet demand with maximum efficiency, while fitting comfortably on your desk.

Fast setup, high uptime

With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.

ultimaker S5

Easy touch control

A 4.7-inch (11.9 cm) touch display makes operating the 3D printer effortless, displaying visual guides to explain configuration changes and maintenance, plus a visual preview of your print.

Designed to connect

The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.

Improved air quality, safer workplace

The Ultimaker S5 Air Manager ensures a safer working environment, providing a closed, inside-out airflow for the Ultimaker S5 3D printer. It filters up to 95% of all ultrafine particles (UFPs) emitted during 3D printing and forms a safe, physical barrier to the print area.

More materials, less hassle

Optimized software profiles precisely control filtering for every Ultimaker material and over 40 third-party filaments. So you can focus on creating the perfect 3D printed part with any material you choose. No worries about UFPs, and no extra time configuring your printer.

Key features

EPA filter: Removes up to 95% of UFPs
Controlled extraction: Inside-out airflow optimized for filtering and print quality
Enhanced safety: Physical barrier prevents reaching inside the printer
Optimized for your application: Detects material being used and adjusts airflow
Easy setup: Printer detects when the Air Manager is connected
Smart monitoring: Printer tracks filter usage and prompts replacement

air manager ufficio

Printed on the Ultimaker S5

Think big, print bigger

With its bigger build volume, the Ultimaker S5 is designed for a reliable 3D printing experience at scale. For large, technical prints, Tough PLA material offers toughness similar to ABS with the simplicity of PLA.

Optimized materials

Ultimaker materials are extensively tested to give the best results on the Ultimaker S5. And Ultimaker Cura software comes with preconfigured profiles, so you don’t need to spend time on complex slicing settings.

Limitless possibilities

3D print everything from quick prototypes to complex, technical parts with Ultimaker’s range of build and support materials. And with an open filament system, you can also choose a custom material solution.