Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.
Bigger build volume
A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches), combined with Ultimaker’s reliable dual extrusion and water-soluble support, gives even more freedom to realize your designs or print multiple parts in one go so you can meet demand with maximum efficiency, while fitting comfortably on your desk.
Fast setup, high uptime
With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.
Easy touch control
A 4.7-inch (11.9 cm) touch display makes operating the 3D printer effortless, displaying visual guides to explain configuration changes and maintenance, plus a visual preview of your print.
Designed to connect
The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.
Printed on the Ultimaker S5
With its bigger build volume, the Ultimaker S5 is designed for a reliable 3D printing experience at scale. For large, technical prints, Tough PLA material offers toughness similar to ABS with the simplicity of PLA.
Ultimaker materials are extensively tested to give the best results on the Ultimaker S5. And Ultimaker Cura software comes with preconfigured profiles, so you don’t need to spend time on complex slicing settings.
3D print everything from quick prototypes to complex, technical parts with Ultimaker’s range of build and support materials. And with an open filament system, you can also choose a custom material solution.
Besides the printer itself, a quick start guide, and test print, the Ultimaker S5 is supplied with several hardware accessories.
Check if all these items are included before continuing.
- Glass build plate
- Spool holder with material guide
- Power cable
- Ethernet cable
- USB stick
- Print core AA 0.4 x2 (one already placed in print head slot)
- Print core BB 0.4
- XY calibration sheet - glass build plate
- Calibration card
- Nozzle cover (3x)
- Tough PLA (750 g)
- PVA (750 g)
- Glue stick
- Hex screwdriver 2 mm
No customer reviews for the moment.